Front panel glass/digitizer and LCD screen assembly for iPhone 5S. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen assembly for iPhone 5S. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Replacement 1560 mAh battery for iPhone 5S. 3.8 Volts (V), 5.92 Watt
Hours (Wh). Does not require soldering. Compatible with all iPhone 5S models.

Sorting trays to track your screws on at a device specific level.

Dock connector assembly includes the Lightning connector, primary microphone, and headphone jack. Compatible with all iPhone 5S models.

Dock connector assembly includes the Lightning connector, primary microphone, and headphone jack. Compatible with all iPhone 5S models.

These custom adhesive strips will secure a battery to the rear case of an iPhone 5S, iPhone 5C or iPhone SE.

Keep your iPhone 5, 5s, 5c, or SE looking pristine.

Set of screws for the iPhone 5, 5C, 5S, or iPhone SE.

Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

This speaker is for speakerphone and audio output.

This antenna is responsible for cellular signals.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This metal bracket secures the front panel assembly cables to the logic board.

This cable assembly includes the front camera, secondary microphone, ambient light and proximity sensors for the iPhone 5S or iPhone SE.

Replace the copper tape that connects the Front Facing Camera and Sensor Cable to the LCD Shield Plate.

This part fits between the LCD and the rest of the internal parts in the iphone 5S or iPhone SE.

Replace the speaker used when the phone is held to your ear.

This antenna is responsible for Bluetooth and Wi-Fi signals.

This metal bracket secures the home button assembly to the display assembly.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

This part is the exterior Volume Button cover and is available in Space Gray, Silver, or Gold.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the audio control cable connector in an iPhone 5S, 5C, or SE. Set of 5 pads.

Replace the adhesive backed foam gasket on the front of the audio control cable connector in an iPhone 5S or SE. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector in an iPhone 5S or SE. Set of 5 pads.

Replace the captive philips screw, spring contact, and adhesive backing from the home button assembly of an iPhone 5S or SE.

Replace the external lens cover for the rear-facing camera on an iPhone 5S or iPhone SE.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 5S or iPhone SE.

Replace the rotational motor with counterweight vibrator for the iPhone 5, iPhone 5S, or iPhone SE.

This metal bracket secures the front facing camera and earpiece speaker to the display assembly.

This assembly includes the home button and home button cable.

This assembly includes the home button and home button cable.

This assembly includes the home button and home button cable.

This cable assembly includes the home button switch and home button cable for the iPhone 5S. This part does not include home button face or its...

Replace the 8 megapixel main camera for the iPhone 5S.

This cable connects the iPhone 5S Power/Lock Button, Volume Buttons, and the Vibrate/Ring Switch to the logic board, and includes the power...

This test cable simplifies connecting and testing Audio Control and Power Button Cables for the iPhone 5S or 5C.

This pair of short clips connect the Logic Board and the Power Button to the Rear Case.

This test cable simplifies connecting multiple lightning connector assemblies for an iPhone 5S or 5C.

This small flex cable wraps around the Left side of the Headphone Jack.

This is a used OEM rear case for the iPhone 5S with the logo and model information on the back. Available in Black, Silver, or Gold.

This is a used OEM rear case for the iPhone 5S with the logo and model information on the back. Available in Black, Silver, or Gold.

This is a used OEM rear case for the iPhone 5S with the logo and model information on the back. Available in Black, Silver, or Gold.

This metal bracket supports the home button cable connection at the bottom end of the iPhone 5S. This part works with the home button cable...

This metal bracket keeps the home button cable connection at the bottom end of the iPhone 5S closed. This part works with the home button cable...

This black elastic gasket fits over the microphone on the lightning connector assembly and fixes the microphone to the rear case.