Replacement 1715 mAh battery for iPhone 6S. 3.82 Volts (V), 6.55 Watt Hours (Wh). Does not require soldering. Compatible with all iPhone 6S models.

Front panel glass/digitizer and LCD screen for iPhone 6S. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen for iPhone 6S. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Sorting trays to track your screws on at a device specific level.

Use these custom adhesive strips to secure an iPhone 6, iPhone 6S, or iPhone 7 battery to the rear case.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

Protect your iPhone 6/6s screen!

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 6S.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 6S.

This assembly includes the lightning connector, two microphones, and the headphone jack, and is compatible with all iPhone 6S models (not iPhone 6,...

This assembly includes the lightning connector, two microphones, and the headphone jack, and is compatible with all iPhone 6S models (not iPhone 6,...

This assembly includes the lightning connector, two microphones, and the headphone jack, and is compatible with all iPhone 6S models (not iPhone 6,...

The speaker used to listen while phone is held to your ear.

Replace the external lens cover for the rear-facing camera on an iPhone 6S.

Replace the external lens cover for the rear-facing camera on an iPhone 6S.

Replace the external lens cover for the rear-facing camera on an iPhone 6S.

Replace the external lens cover for the rear-facing camera on an iPhone 6S.

Set of screws for the iPhone 6S.

This cable assembly includes the front camera, secondary microphone, ambient light and proximity sensors.

Replace the adhesive area on the flex cable of the lightning connector assembly for an iPhone 6S.

This assembly includes the home button and home button cable for the iPhone 6S.

This assembly includes the home button and home button cable for the iPhone 6S.

This assembly includes the home button and home button cable for the iPhone 6S.

This assembly includes the home button and home button cable for the iPhone 6S.

Replace the 12 megapixel main camera for the iPhone 6S.

This metal bracket secures the home button assembly to the display assembly.

This cable connects the iPhone 6 Volume Buttons and Vibrate/Ring Switch to the logic board. It is compatible with all iPhone 6S models (Not iPhone...

Replace the antenna contact assembly that fits in the top left of the rear case of the iPhone 6S.

Replace the large speaker for speakerphone and audio output.

Replace the Taptic Engine or linear oscillating vibrator for the iPhone 6S.

Replace the plastic mount and anti-dust mesh for the lower left microphone.

Replace the Wi-Fi diversity antenna.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace a damaged SIM card tray holder socket on the logic board of an iPhone 6S. This part requires micro soldering.

Replace the small metal clip that holds the antenna cable from the lightning connector assembly against the side of the loudspeaker assembly in an...

This metal bracket secures the rear facing camera to the display assembly.

This metal bracket secures the earpiece speaker to the display assembly.

This plastic guide centers the front-facing camera over the camera lens opening in the front glass panel.

Replace the set of four adhesive electromagnetic interference shield covers on the logic board of the iPhone 6S.

This metal bracket secures the audio control and power button cable connector to the logic board.

This test cable simplifies connecting and testing rear-facing cameras for the iPhone 6S and iPhone 6S Plus.

Replace the mesh and plastic bezel that covers the earpiece speaker opening in the iPhone 6S.

This metal bracket secures the front panel assembly cables to the logic board.

Replace the black adhesive cover on the LCD Shield Plate.

This part fits between the LCD and the rest of the phone's internal parts.

Replace the adhesive backed foam spacer on the back of the front-facing camera and sensor cable connector in an iPhone 6S. Set of 5 pads.

Replace the plastic mount and anti-dust mesh for the loudspeaker and lower right microphone.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector in an iPhone 6S. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the audio control cable connector in an iPhone 6S. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 6S. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 6S. Set of 5 pads.

This cable connects the iPhone 6 Volume Buttons and Vibrate/Ring Switch to the logic board. It is compatible with all iPhone 6S models (Not iPhone...

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6S. Set of 5 pads.