Replacement 2750 mAh battery for iPhone 6S Plus. 3.8 Volts (V), 10.45 Watt Hours (Wh). Does not require soldering. Compatible with all iPhone 6S Plus models.

Sorting trays to track your screws on at a device specific level.

Front panel glass/digitizer and LCD screen for iPhone 6S Plus. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen for iPhone 6S Plus. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Use these custom adhesive strips to secure an iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus battery to the rear case.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

Protect your iPhone 6/6s Plus screen!

This plastic guide centers the front-facing camera over the camera lens opening in the front glass panel.

This test cable simplifies connecting and testing rear-facing cameras for the iPhone 6S and iPhone 6S Plus.

Replace the 12 megapixel main camera for the iPhone 6S Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6S Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6S Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6S Plus.

Replace the external lens cover for the rear-facing camera on an iPhone 6S Plus.

Replace the large speaker for speakerphone and audio output.

Replace the cable and internal switches for the volume and mute controls.

Replace the gold-colored conductive adhesive area on the flex cable of the lightning connector assembly for an iPhone 6S Plus.

Replace the Wi-Fi diversity antenna.

Replace the Wi-Fi and Bluetooth signal antenna in the top left of the rear case of the iPhone 6S Plus.

Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector in an iPhone 6S Plus. Set of 5 pads.

Set of screws for the iPhone 6S Plus.

This metal bracket secures the front panel assembly cables to the logic board.

This assembly includes the home button and home button cable for the iPhone 6S Plus.

This assembly includes the home button and home button cable for the iPhone 6S Plus.

This assembly includes the home button and home button cable for the iPhone 6S Plus.

This assembly includes the home button and home button cable for the iPhone 6S Plus.

Replace the adhesive backed foam spacer on the back of the volume control cable connector in an iPhone 6S Plus. Set of 5 pads.

This metal bracket secures the earpiece speaker to the display assembly.

Replace the plastic mount and anti-dust mesh for the loudspeaker and lower right microphone.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 6S Plus. Set of 5 pads.

Replace the plastic mount and anti-dust mesh for the lower left microphone.

Replace the set of five retaining clips in the edges of the rear case that help hold the front panel assembly in place.

Replace the adhesive backed foam spacer on the back of the power button cable connector in an iPhone 6S Plus. Set of 5 pads.

This metal bracket secures the home button assembly to the display assembly.

This metal bracket secures the mute switch cover to the inside of the rear case.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This metal bracket secures the battery connector to the logic board.

This metal bracket secures the camera flash and top microphone to the rear case.

Replace the Taptic Engine or linear oscillating vibrator for the iPhone 6S Plus.

This short flex cable connects the logic board to the NFC antenna.

This bracket connects the logic board to the top cellular antenna.

Replace the cable and internal Power Button switch with its metal bracket.

Replace the adhesive backed foam spacer on the back of the front-facing camera and sensor cable connector in an iPhone 6S Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 6S Plus. Set of 5 pads.

This part fits between the LCD and the rest of the phone's internal parts.

Replace the clip that holds the antenna cables to the edge of the loudspeaker assembly.

Replace the black adhesive cover on the LCD Shield Plate.

This metal bracket secures the lightning connector assembly to the rear case.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6S Plus. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 6S Plus. Set of 5 pads.

This metal bracket secures the power switch to the inside of the rear case.

This metal bracket secures the volume switches to the inside of the rear case.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 6S Plus.