Front panel glass/digitizer and LCD screen for iPhone 6. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen for iPhone 6. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Replacement 1810 mAh battery for iPhone 6. 3.82 Volts (V), 6.91 Watt
Hours (Wh). Does not require soldering. Compatible with all iPhone 6 models.

Sorting trays to track your screws on at a device specific level.

Use these custom adhesive strips to secure an iPhone 6, iPhone 6S, or iPhone 7 battery to the rear case.

Replace the adhesive gasket ring on the lens end of the front-facing camera for an iPhone 5, 5S, 5C, SE, 6, 6 Plus, 6S, or 6S Plus. Set of 5 gaskets.

Protect your iPhone 6/6s screen!

Replace the small metal clip that holds the antenna cable from the lightning connector assembly against the side of the loudspeaker assembly in an...

This assembly includes the lightning connector, primary microphone, and headphone jack, and is compatible with all iPhone 6 models (not iPhone 6...

This assembly includes the lightning connector, primary microphone, and headphone jack, and is compatible with all iPhone 6 models (not iPhone 6...

This antenna flex cable has four connectors to the logic board.

Replace the Wi-Fi antenna assembly for the iPhone 6.

Replace the small speaker used to listen while phone is held to your ear.

This assembly includes the home button and home button cable for the iPhone 6 or 6 Plus.

This assembly includes the home button and home button cable for the iPhone 6 or 6 Plus.

This assembly includes the home button and home button cable for the iPhone 6 or 6 Plus.

Set of screws for the iPhone 6 or 6 Plus.

This cable assembly includes the front camera, secondary microphone, ambient light and proximity sensors.

This gasket holds the home button onto the display assembly.

This part fits between the LCD and the rest of the phone's internal parts and includes the home button link cable.

Replace the 8 megapixel main camera for the iPhone 6.

Replace the external lens cover for the rear-facing camera on an iPhone 6.

Replace the external lens cover for the rear-facing camera on an iPhone 6.

Replace the external lens cover for the rear-facing camera on an iPhone 6.

This cable connects the home button assembly to the logic board and follows a channel in the LCD shield plate.

Replace the cable and internal Power Button switch with its metal bracket.

Replace the large speaker for speakerphone and audio output.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch and is available in Space Gray, Silver,...

Replace the cable and internal audio control switches with metal brackets.

Replace the linear oscillating vibrator for the iPhone 6.

This metal bracket secures the front panel assembly cables to the logic board.

Replace the gold-colored conductive adhesive area on the flex cable of the lightning connector assembly for an iPhone 6.

This cable connects the iPhone 6 Power/Lock Button to the logic board. It is compatible with all iPhone 6 models (not iPhone 6 Plus, 6S, or 6S Plus).

Replace the black adhesive cover that holds the home button link cable on the LCD Shield Plate.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6. Set of 5 pads.

This metal bracket secures the battery connector to the logic board.

Replace the mesh and plastic bezel that covers the earpiece speaker opening in the iPhone 6 and 6 Plus.

This cable connects the iPhone 6 Volume Buttons and Vibrate/Ring Switch to the logic board. It is compatible with all iPhone 6 models (Not iPhone 6...

Replace the rear panel for the iPhone 6.

Replace the rear panel for the iPhone 6.

Replace the adhesive backed foam spacer on the back of the home button cable where it connects to the logic board in an iPhone 6. Set of 5 pads.

This metal bracket secures the home button assembly to the display assembly.

This metal bracket secures the camera flash to the rear case.

This cable assembly includes the home button switch and home button cable for the iPhone 6 or 6 Plus. This part does not include the home button...

Replace the external power button cover for the iPhone 6.

This test cable simplifies connecting multiple front-facing cameras for the iPhone 6 and 6 Plus.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone 6.

Replace the small metal bracket that connects the top left corner of the logic board to the rear case in an iPhone 6.

This part fits between the LCD and the rest of the phone's internal parts.

This metal bracket secures the earpiece speaker to the display assembly.

This metal bracket secures the rear facing camera to the rear case.

This metal bracket secures the lightning connector assembly to the rear case.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 6. Set of 5 pads.

This test cable simplifies connecting and testing multiple home button assemblies and home button link cables for the iPhone 6.

This metal bracket secures the audio control cable and the power button cable to the logic board.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 6.

Replace the clear plastic frame for the proximity sensor on the back of the display assembly.

Replace the black plastic bracket that holds the microphone in place at the bottom edge of the iPhone 6.