Sorting trays to track your screws on at a device specific level.

Front panel glass/digitizer and LCD screen for iPhone 7. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen for iPhone 7. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Replacement 1960 mAh battery for iPhone 7. 3.8 Volts (V), 7.45 Watt
Hours (Wh). Does not require soldering. Compatible with all iPhone 7 models.

Use these custom adhesive strips to secure an iPhone 6, iPhone 6S, or iPhone 7 battery to the rear case.

This test cable simplifies connecting and testing rear-facing cameras in an iPhone 7 or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

This metal bracket secures the home button assembly to the display assembly.

This test cable simplifies connecting multiple audio control and power button cable assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple home button assemblies for the iPhone 7 or 7 Plus.

This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.

Replace the internal clips that hold the external button covers in place. Set of three.

Replace a damaged SIM card tray holder socket on the logic board of an iPhone 7 or 7 Plus. This part requires micro soldering.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7.

Replace the external lens cover for the rear-facing camera on an iPhone 7.

Replace the lightning connector, two microphones, and flex cable.

Replace the lightning connector, two microphones, and flex cable.

Replace the lightning connector, two microphones, and flex cable.

Set of screws for the iPhone 7.

This cable assembly includes the front-facing camera and the proximity sensor.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the 12 megapixel main camera.

Replace the adhesive backed foam pad between the rear-facing camera and the rear case of an iPhone 7. Set of 5 gaskets.

Replace the speaker used to listen while phone is held to your ear.

Replace the mesh covers for the speaker, vent, and microphone openings in an iPhone 7. Mesh covers are part of the water and dust ingress protection for the phone.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

Replace the antenna in the top left of the rear case.

Replace a damaged or missing dock port edge bezel.

Replace a damaged or missing dock port edge bezel.

Replace a damaged or missing dock port edge bezel.

Replace a damaged or missing dock port edge bezel.

Replace the mesh that covers the earpiece speaker opening in the iPhone 7.

This panel fits between the LCD and the rest of the phone's internal parts.

Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly for an iPhone 7.

Replace the Taptic Engine or linear oscillating vibrator for the iPhone 7.

This metal bracket secures the audio control and power button cable connector to the logic board.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case. This part is adhered to the rear case.

This custom cut adhesive film secures the earpiece speaker anti-dust mesh bracket to the front panel of an iPhone 7.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace the large speaker for speakerphone and audio output.

Replace a scratched or missing camera flash diffuser lens.

Replace the gasket that seals the face of the earpiece speaker to the back of the earpiece speaker dust proof mesh bracket on the inside of the front panel assembly.

Replace the plastic bracket that holds the earpiece speaker opening mesh in place against the inside of the front panel assembly.

Replace the internal audio and power switches and their brackets for an iPhone 7.

Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 7. Set of 5 pads.

Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.