Sorting trays to track your screws on at a device specific level.

Front panel glass/digitizer and LCD screen for iPhone 7 Plus. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Front panel glass/digitizer and LCD screen for iPhone 7 Plus. Does not include home button assembly, front camera assembly, earpiece speaker, or the LCD shield plate.

Replacement 2900 mAh battery for iPhone 7 Plus. 3.82 Volts (V), 11.10 Watt
Hours (Wh). Does not require soldering. Compatible with all iPhone 7 Plus models.

Use these custom adhesive strips to secure an iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus battery to the rear case.

This cable assembly includes the front-facing camera, one microphone and the proximity sensor.

Replace the external lens covers for the dual rear-facing cameras on an iPhone 7 Plus.

Replace the speaker used to listen while phone is held to your ear.

Replace the mesh that covers the earpiece speaker opening in the iPhone 7 Plus.

Set of screws for the iPhone 7 Plus.

Replace the dual 12 MP rear-facing cameras in an iPhone 7 Plus.

This test cable simplifies connecting and testing rear-facing cameras in an iPhone 7 or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace the 2 screws in the bottom exterior of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.

Replace a torn or missing gasket on the SIM card tray for an iPhone 7 or iPhone 7 Plus.

Replace the adhesive backed foam pad between the rear-facing cameras and the rear case of an iPhone 7 Plus. Set of 5 gaskets.

This metal bracket secures the home button assembly to the display assembly.

Replace the black adhesive that secures the LCD IC and cable to the LCD shield plate. Set of 5.

This tray holds the nano SIM card and is inserted on the side of the phone.

This metal bracket secures the earpiece speaker to the display assembly.

Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 7 Plus. Set of 5 pads.

Replace the lightning connector, two microphones, and flex cable.

Replace the lightning connector, two microphones, and flex cable.

Replace the lightning connector, two microphones, and flex cable.

Replace the internal audio and power switches and their brackets for an iPhone 7 Plus.

This custom cut adhesive film secures the earpiece speaker anti-dust mesh bracket to the front panel of an iPhone 7 Plus.

Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 7 Plus. Set of 5 pads.

This metal bracket secures the camera flash to the rear case.

This metal bracket secures the rear-facing camera connector to the logic board.

This metal bracket secures the audio control and power button cable connector to the logic board.

This metal bracket secures the front panel assembly cables and the battery cable to the logic board.

This metal bracket secures the rear facing camera to the display assembly.

Replace the set of five retaining clips in the edges of the rear case that help hold the front panel assembly in place.

Replace the antenna in the top left of the rear case.

Replace the earpiece speaker plastic bracket, speaker gasket, opening mesh, and its adhesive on the inside of the front panel assembly.

Replace the gasket that seals the earpiece speaker mesh bracket assembly against the back of the earpiece speaker.

Replace a scratched or missing camera flash diffuser lens.

Replace the adhesive backed elastic gasket for the loudspeaker opening of an iPhone 7 Plus. Set of 5 gaskets.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch.

Replace a torn or missing gasket on the hold button assembly for an iPhone 7 or iPhone 7 Plus.

Replace the metal bracket that holds the lens end of the rear-facing camera in place in the rear case.

Replace the adhesive backed foam spacer on the back of either of the rear-facing camera cable connectors in an iPhone 7 Plus. Set of 5 pads.

This test cable simplifies connecting multiple audio control and power button cable assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone 7 or iPhone 7 Plus.

This test cable simplifies connecting multiple home button assemblies for the iPhone 7 or 7 Plus.

This test cable simplifies connecting and testing front-facing camera and sensor cable assemblies for an iPhone 7 or iPhone 7 Plus.

Replace the internal clips that hold the external button covers in place. Set of three.

Replace a damaged SIM card tray holder socket on the logic board of an iPhone 7 or 7 Plus. This part requires micro soldering.

These plastic guides center the front-facing camera and the ambient light sensor over the openings in the front glass panel.

Replace the two gold-colored conductive adhesive areas on the flex cable of the lightning connector assembly for an iPhone 7 Plus.

Replace the mesh covers for the speaker, vent, and microphone openings in an iPhone 7 Plus. Mesh covers are part of the water and dust ingress protection for the phone.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 7 Plus.

This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 7 Plus.