This part is the rear case of the iPhone 5 with no internal components attached.

This part is the rear case of the iPhone 5 with no internal components attached.

Replace the external switch cover for the vibrate/ring switch. This part does not include the internal electronic switch.

Replace the external switch cover for the vibrate/ring switch. This part does not include the internal electronic switch.

This test cable simplifies connecting multiple front camera and sensor cable assemblies for the iPhone 5.

This test cable simplifies connecting multiple lightning connector assemblies for the iPhone 5.

This black elastic gasket fits over the microphone on the lightning connector assembly and fixes the microphone to the rear case.

This metal bracket secures the front facing camera and earpiece speaker to the display assembly.

This test cable simplifies connecting and testing LCD Screens and Digiizers for the iPhone 5.

This assembly includes the front facing camera, secondary microphone, ambient light and proximity sensors.

This test cable simplifies connecting and testing Audio Control and Power Button Cables for the iPhone 5.

This antenna is responsible for picking up nearby Wi-Fi signals.

Replace the external lens cover for the rear-facing camera on an iPhone 5.

This tray holds the nano SIM card and is inserted on the side of the phone.

Replace the small metal contact clip that fits over the plastic tab on the loudspeaker assembly of an iPhone 5.

Replace the adhesive backed foam spacer on the back of the front camera and sensor cable connector in an iPhone 5. Set of 5 pads.

This part fits between the LCD and the rest of the internal parts of the phone.

This metal bracket secures the front panel assembly cables to the logic board.

This metal bracket secures the home button assembly to the display assembly.

Replace the speaker for speakerphone and audio output.

This is the external volume control button cover. It does not include the internal electronic switches.

This is the external volume control button cover. It does not include the internal electronic switches.

This metal bracket secures the battery connector to the logic board.

This pair of cables connects several components on the logic board.

Replace the 8 megapixel rear facing main camera for the iPhone 5.

This part is the speaker used to listen while the phone is held to your ear.

This part is the radiating antenna which is adhered to the dock connector.

This is the external button cover for the power/lock button. It does not include the internal electronic switch.

This is the external button cover for the power/lock button. It does not include the internal electronic switch.

This part includes the flex cable, internal home button switch, and the gold contacts.

This cable connects iPhone 5 volume buttons, mute/silent button, power button, and vibrate/ring switch to the logic board. In addition, it holds...

This assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with all iPhone 5 models.

This assembly includes the lightning connector, primary microphone, and headphone jack and is compatible with all iPhone 5 models.

Replace the rear plastic case for the iPhone 5C. Available in White, Yellow, Blue, Green, or Pink.

Replace the rear plastic case for the iPhone 5C. Available in White, Yellow, Blue, Green, or Pink.

Replace the rear plastic case for the iPhone 5C. Available in White, Yellow, Blue, Green, or Pink.

Replace the rear plastic case for the iPhone 5C. Available in White, Yellow, Blue, Green, or Pink.

Replace the rear plastic case for the iPhone 5C. Available in White, Yellow, Blue, Green, or Pink.

Replace the external lens cover for the rear-facing camera on an iPhone 5C.

This metal clip connects the Logic Board to the rear case near the rear facing camera.

Replace the external volume button cover for the iPhone 5C.

Replace the external volume button cover for the iPhone 5C.

Replace the external volume button cover for the iPhone 5C.

This test cable simplifies connecting and testing LCDs and digitizers for the iPhone 5C.

This antenna is responsible for picking up Wi-Fi and Bluetooth signals.

This metal bracket secures the front facing camera and earpiece speaker to the display assembly.

Replace the vibrator motor for the iPhone 5C.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This tray holds the nano SIM card and is inserted on the side of the phone.

This plate fits between the LCD and the rest of the phone's internal parts.

This flex cable connects the power button bracket to the rear case.

This is the speaker used to listen while phone is held to your ear.

Replace the copper tape that connects the Front Facing Camera and Sensor Cable to the LCD Shield Plate.

This metal bracket secures the front panel assembly cables to the logic board.

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch. Available in White, Yellow, Blue, Green,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch. Available in White, Yellow, Blue, Green,...

This set of exterior case buttons includes the Power/Lock Button, Volume Buttons, and Vibrate/Ring Switch. Available in White, Yellow, Blue, Green,...